Object UNIFORM AREA

<< Click to Display Table of Contents >>

Navigation:  Embroidery Digitizing > Objects TYPES & Fill STYLES >

Object UNIFORM AREA

What is an Area object?

Digitizing Sections 8

An area is an object type made of a continuous sequence of nodes that define the geometry of the object, where the last node matches with the first one (a closed shape). The shape defined by the nodes is the outline of the area object.

The properties of the nodes define if the segments between the nodes are straight lines or curves, and if the node shows a continuity or a discontinuity (also known as corner) of the curves (*).

The main requirement for area object is that: No part of the object's outline should cross another part of the same outline, as it me produce unpredictable results (that is not an area).

 

There are 3 sub-types of areas according to the kind of "direction lines":

Digitizing Sections 8

Uniform Area:

There is a single and flat stitch direction line

Digitizing Sections 9

Turning Area:

There are several direction lines (like the column object)

Digitizing Sections 10

Flexible Area:

The direction lines is defined as a path (with straight and curve line segments)

 

icon-info-1

(*) read about how to digitize and node properties in Classic Digitizing.

 

Samples of Uniform Area Objects with several Stitch Fill styles.

Sample Uniform Area Pattern 3

Sample Uniform Area Programmable3

Sample Uniform Area Aplique 3

 

Elements of the Uniform Area Object

ot-area-uniform-2

Sequence of nodes of the outline (1-7) **

Sequence of nodes of the hole 1 (8-10)

Direction line (11-12)

Emboss lines

Entry point (13)

Exit point (14)

 

** required element

 

OUTLINE NODES

They are points of the main geometry of the object (outline), which include properties to define the segment (line or curve) between 2 consecutive nodes.

 

HOLE NODES

They are points of the holes of the object, which include properties to define the segment (line or curve) between 2 consecutive nodes.

The uniform area object may have 1 or more holes, or none.

 

DIRECTION LINE

They are 2 points that represent the stitch direction (orientation, angle) of the main fill style.

If the direction line is not specified, the application will define it as an horizontal line.

 

EMBOSS LINES or SPLIT LINE

The emboss is an effect that you can optionally add to this object.

You can define a path (the emboss line) within the object outline. When any stitch of the main fill crosses that path, that stitch is divided (split) on that cross point. When several stitches of the main fill are divided by the emboss line, the consecutive needle penetration along the emboss line will produce an emboss effect.

You can add several emboss lines to this object type.

Emboss effects makes sense for zig-zag and pattern stitches (it makes no sense for programmable stitches, etc)

 

ENTRY POINT &

EXIT POINT

The entry point is the point of the object where the first stitch is placed. The exit point is the point of the object where the last stitch is placed. The connection between the exit point of an object and the entry point of the following object may vary according to the distance between them. If both points match there is no need to add anything to join them. Instead when there is a distance between them, the connection is a jump-stitch with or without a thread trim.

You can set the entry point and the exit point wherever you want. It is usually convenient to define the entry point of an object close to the exit point of the precedent object in order to avoid long jump-stitches and frequent thread trims. We suggest you to plan the sequence of object of the design previously to minimize the distance between exit and entry points of consecutive objects.

The software includes a "close point connection" feature for the case you prefer not to set each entry and exit point. This feature automatically moves the entry and exist points of the objects while they are created or edited to reach the minimum distance between them on-the-fly.

You can move the position of the entry or exit points at any time (object editing). You can also set the "close point connection" mode.

The true entry/exit points are the points of the shape that are closer to the user defined entry/exit points.

 

How to create a Uniform Area Object?

Click on CREATE OBJECT, on the MAIN bar and select the UNIFORM AREA Embroidery Object + PATTERN STITCHES fill style (or any other stitch fill style).

You can select the object type from the tooltab EMBROIDERY or through the drop-down menu on the CREATE OBJECT arrow.

Click on MANUAL digitizing.

Insert the OUTLINE NODES in the workspace (read about node properties to create straight or curve line segments).

Click on HOLES if you want to add one or more holes on the object.

Insert the HOLE NODES in the workspace (read about node properties to create straight or curve line segments).

Repeat this step if more holes are required.

Click on DIRECTION if you want to define a custom direction line.

Insert the 2 ends of the direction line in the workspace.

Click on EMBOSS LINES if you want to add one or more emboss lines.

Insert the path of the embossed line as a sequence of nodes (with the same properties) inside the object shape.

Repeat this step if more emboss lines are required.

Click on ENTRY POINT if you want to set the entry point, otherwise let the application optimize it.

Define the entry point with a click on the position of the workspace where you want the first stitch of this object, or let the application optimize it.

Click on EXIT POINT if you want to set the exit point, otherwise let the application optimize it.

Define the exit point with a click on the position of the workspace where you want the last stitch of this object.

Click on ENTER or click on Accept/OK from the context menu to confirm the object.

Digitizing Sections 8

 

geometric-elements-3

 

ot-area-uniform-2

 

Available Stitch Fill Styles for Uniform Area Object

 

Area + Pattern Stitches

Area + Programmable Stitches

Area + Cross Stitches

Area + Radial Stitches

Area + Texture Stitches

Area + Applique Stitches

Area + Auto-Fill

 

Specialty Fill Styles for Uniform Area Object

 

Area + Radial Sequin Fill

Area + Radial Multi-Sequin Fill

Area + Grid Sequin Fill

Area + Chenille Loop Stitches

Area + Chenille Grid Stitches