Area + Outer Ring Bling Fill

<< Click to Display Table of Contents >>

Navigation:  Bling on the Embroidery Software > Bling Digitizing > Bling Fill STYLES > Advanced Bling Fill Styles Pack >

Area + Outer Ring Bling Fill

Area Single Outer Ring HF 0

This fill style places the bling beads (same color, size or shape) outside a closed area, as a limited number of concentric paths with regular bling fill (outer rings) and variable beads spacing.
Area Single Outer Ring HF 1
Area Single Outer Ring HF 2
Area Single Outer Ring HF 3

How to create an object of this type?

➢Select the tool Create an Area with Outer Ring Bling Fill through any available way:

oOpen the Smart Design window and select the corresponding tool.

oClick on the arrow below the "Create" button and select the corresponding tool.

oOpen the Bling ToolsTab, click on the arrow below the "Outer Area" button and select the corresponding tool.

 

A context ToolsTab containing the most frequently used properties of this fill style will open.

Area_Single_Outer_Ring_HF_4

 

➢Set the fill properties from the ToolsTab (above) or the Object Inspector (below).

 

➢Digitize the object (through any digitizing method) by inserting the required elements of this object type.
HF Single Area with Outer Ring Fill new

 

➢Confirm and GENERATE bling beads.

 

➢If editing is required, just select the Select Object tool on the Main Toolbar.
HF Single Area with Outer Ring Fill new 2

icon-info-1

About Fill Style Properties

•You can edit (define or modify) all the properties of this object type from the Object Inspector (see below).

•The most commonly used properties are also available on the corresponding tooltab.

•The current value of the properties are displayed on the Object Inspector or the tooltab when an object of this type is being created or when an existing object of this type is selected.

 

 

hmtoggle_arrow1Main Properties

 

OI Area_OuterRingFill

 

 

HF summary 1

Specify the bling bead type of the object (the order number of the bling palette).

Bling Types on Path Fill Style

 

Bead Type Number: 1

 

Bead Type Number: 2

 
HF summary 9

 
HF summary 10

Bling Types on Area with Uniform Fill Style

 

Bead Type Number: 1

 

Bead Type Number: 2

 
HF summary 32

 
HF summary 33

Bling Types on Area with Flat Fill Style

 

Bead Type Number: 1

 

Bead Type Number: 2

 
HF summary 54

 
HF summary 55

Bling Types on Area with Flexible Fill Style

 

Bead Type Number: 1

 

Bead Type Number: 2

 
HF summary 70

 
HF summary 71

 

It specifies the bling bead type of the object.

 

HF summary 3

Distance between 2 neighbor bling beads.

A distance of 0 (zero) means that bead has no separation with the beads next to it.

Beads Separation on Paths:

 

Beads Separation: 0.3 mm

 

Beads Separation: 1.0 mm

 
HF summary 14

 
HF summary 15

Beads Separation on Areas:

 

Beads Separation: 0.5 mm

 

Beads Separation: 1.5 mm

 
HF summary 34

 
HF summary 35

Variable Beads Separation on Paths:

 

Beads Separation: 2.0 mm at the end

 

Beads Separation: 4.0 mm at the end

 
HF summary 17

 
HF summary 16

Variable Beads Separation on Areas:

 

Beads Separation: 2.0 mm at the end

 

Beads Separation: 5.0 mm at the end

 
HF summary 186

 
HF summary 187

 

It specifies the average distance between beads.

 

HF summary 85

Open the Rings Patterns Selector and Editor.

Select any of the pre-designed ring patterns, or create a custom ring pattern.

Inner Ring Pattern Selector & Editor

HF_summary_91

 

Inner Ring Fill samples

HF summary 92
HF summary 93
HF summary 95

Outer Ring Pattern Selector & Editor

HF_summary_91a_J

Outer Ring Fill samples

HF summary 113
HF summary 116
HF summary 114

 

It allows to use, edit or create radial patterns.

 

HF summary 42

Set the distance from the object borderline to the bling fill style.

 

 

Margin from Border: 0.0 mm

 

Margin from Border: 2.0 mm

 
HF summary 44

 
HF summary 45

 

 

Margin from Border: 0.0 mm

 

Margin from Border: 3.0 mm

 
HF summary 76

 
HF summary 77

 

 

Margin from Border: 0.0 mm

 

Margin from Border: 3.0 mm

 
HF summary 98

 
HF summary 99

 

 

Margin from Border: 0.0 mm

 

Margin from Border: 5.0 mm

 
HF summary 119

 
HF summary 120

 

It sets a minimum distance from the beads to the object border.

 

HF summary 5

Bling beads can be rotated an angle (from its center). Certainly, it makes sense for non-round beads only.

Some object types (path types) allow to automatically rotate the bead according to the tangent angle of the path at the place of the bead. For this case the available options are:

oPerpendicular: Beads are rotated following a variable direction perpendicular to the path, plus the specified angle value.

oTangent: Beads are rotated following a variable direction tangent to the path, plus the specified angle value.

oFixed (default option): Beads are placed at a the fixed angle specified by the angle value.

 

 

Angle Mode: Fixed

Angle Mode: Tangent

Angle Mode: Perpendicular

 
HF summary 24
HF summary 23
HF summary 22

 

 

Angle Mode: Fixed

Angle Mode: Tangent

Angle Mode: Perpendicular

 
HF summary 78
HF summary 79
HF summary 80

 

 

Angle Mode: Fixed

Angle Mode: Tangent

Angle Mode: Perpendicular

 
HF summary 102
HF summary 101
HF summary 100

 

 

Angle Mode: Fixed

Angle Mode: Tangent

Angle Mode: Perpendicular

 
HF summary 123
HF summary 122
HF summary 121

This property is an optional feature.

It allows to rotate bling beads.

 

HF summary 107

Enable or disable the fill style on the holes of the area.

 

 

Disable Ignore Holes

 

Enable Ignore Holes

 
HF summary 117

 
HF summary 118

 

It allows to enable or disable the fill style in the holes

 

Read also

•Object AREA

 

This feature is included in the Advanced Bling Fill Styles Pack