|
This fill style places the bling beads (same color, size or shape) outside a closed area, as a limited number of concentric paths with regular bling fill (outer rings) and variable beads spacing.
|
How to create an object of this type?
➢Select the tool Create an Area with Outer Ring Bling Fill through any available way:
oOpen the Smart Design window and select the corresponding tool.
oClick on the arrow below the "Create Objects" button and select the corresponding tool.
oOpen the Bling ToolsTab, click on the arrow below the "Single-Bling" button and select the corresponding tool.
A context ToolsTab containing the most frequently used properties of this fill style will open.
➢Set the fill properties from the ToolsTab (above) or the Object Inspector (below).
➢Digitize the object (through any digitizing method) by inserting the required elements of this object type. |
|
➢Confirm and GENERATE bling beads.
➢If editing is required, just select the Select Object tool on the Main Toolbar. |
|
|
About Fill Style Properties
•You can edit (define or modify) all the properties of this object type from the Object Inspector (see below). •The most commonly used properties are also available on the corresponding tooltab. •The current value of the properties are displayed on the Object Inspector or the tooltab when an object of this type is being created or when an existing object of this type is selected. |
|
|
Bling Type
|
Specify the bling bead type of the object (the order number of the bling palette).
|
Bling Types on Path Fill Style
|
Bead Type Number: 1
|
|
Bead Type Number: 2
|
|
|
|
|
Bling Types on Area with Uniform Fill Style
|
Bead Type Number: 1
|
|
Bead Type Number: 2
|
|
|
|
|
Bling Types on Area with Flat Fill Style
|
Bead Type Number: 1
|
|
Bead Type Number: 2
|
|
|
|
|
Bling Types on Area with Flexible Fill Style
|
Bead Type Number: 1
|
|
Bead Type Number: 2
|
|
|
|
|
|
It specifies the bling bead type of the object.
Beads Separation
|
Distance between 2 neighbor bling beads.
A distance of 0 (zero) means that bead has no separation with the beads next to it.
|
Beads Separation on Paths:
|
Beads Separation: 0.3 mm
|
|
Beads Separation: 1.0 mm
|
|
|
|
|
Beads Separation on Areas:
|
Beads Separation: 0.5 mm
|
|
Beads Separation: 1.5 mm
|
|
|
|
|
Variable Beads Separation on Paths:
|
Beads Separation: 2.0 mm at the end
|
|
Beads Separation: 4.0 mm at the end
|
|
|
|
|
Variable Beads Separation on Areas:
|
Beads Separation: 2.0 mm at the end
|
|
Beads Separation: 5.0 mm at the end
|
|
|
|
|
|
It specifies the average distance between beads.
Ring Patterns
|
Open the Rings Patterns Selector and Editor.
Select any of the pre-designed ring patterns, or create a custom ring pattern.
|
Inner Ring Pattern Selector & Editor
Inner Ring Fill samples
Outer Ring Pattern Selector & Editor
Outer Ring Fill samples
|
It allows to use, edit or create radial patterns.
Margin from Border
|
Set the distance from the object borderline to the bling fill style.
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 2.0 mm
|
|
|
|
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 3.0 mm
|
|
|
|
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 3.0 mm
|
|
|
|
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 5.0 mm
|
|
|
|
|
|
It sets a minimum distance from the beads to the object border.
Beads Angle Mode
|
Bling beads can be rotated an angle (from its center). Certainly, it makes sense for non-round beads only.
Some object types (path types) allow to automatically rotate the bead according to the tangent angle of the path at the place of the bead. For this case the available options are:
oPerpendicular: Beads are rotated following a variable direction perpendicular to the path, plus the specified angle value. oTangent: Beads are rotated following a variable direction tangent to the path, plus the specified angle value. oFixed (default option): Beads are placed at a the fixed angle specified by the angle value. |
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
This property is an optional feature.
|
It allows to rotate bling beads.
Ignore Holes
|
Enable or disable the fill style on the holes of the area.
|
|
Disable Ignore Holes
|
|
Enable Ignore Holes
|
|
|
|
|
|
It allows to enable or disable the fill style in the holes
|
Read also
•Object AREA