|
This fill style places several types of bling beads on a closed area, as a set of paths (rays) with regular fill that follow the directions of the pair of nodes (columns).
|
How to create an object of this type?
➢Select the tool Create a Column with Multi Bling Ray Fill through any available way:
oOpen the Smart Design window and select the corresponding tool.
oClick on the arrow below the "Create Objects" button and select the corresponding tool.
oOpen the Bling ToolsTab, click on the arrow below the "Multi-Bling" button and select the corresponding tool.
A context ToolsTab containing the most frequently used properties of this fill style will open.
➢Set the fill properties from the ToolsTab (above) or the Object Inspector (below).
➢Digitize the object (through any digitizing method) by inserting the required elements of this object type. |
|
➢Confirm and GENERATE bling beads.
➢If editing is required, just select the Select Object tool on the Main Toolbar. |
|
|
About Fill Style Properties
•You can edit (define or modify) all the properties of this object type from the Object Inspector (see below). •The most commonly used properties are also available on the corresponding tooltab. •The current value of the properties are displayed on the Object Inspector or the tooltab when an object of this type is being created or when an existing object of this type is selected. |
|
|
Bling Type List
|
Also select the bling bead types to use on this object.
Press the left mouse button on this option to unfolds the current bling palette.
|
|
Beads types: 2
|
|
Beads types: 4
|
|
|
|
|
|
Beads types: 2
|
|
Beads types: 4
|
|
|
|
|
|
Beads types: 2
|
|
Beads types: 4
|
|
|
|
|
|
Beads types: 2
|
|
Beads types: 5
|
|
|
|
|
|
It specifies the types of bling beads used in the object.
Rays Density
|
Specify the number of rays of the object.
Available options are:
oRays separation: distance between rays (mm) oRays count: number of rays in the column object |
Specify the number of rays through the Ray Separation:
|
Ray Separation: 5.0 mm
|
|
Ray Separation: 10.0 mm
|
|
|
|
|
Specify the number of rays through the Ray Count:
|
Ray Count: 9
|
|
Ray Count: 14
|
|
|
|
|
|
It defines the number of rows of the object.
Multi-Bling Pattern
|
Define a sequence of bling bead types (pattern) and the spacing when placed on the paths.
Clicking on the option unfolds the bead type list of the current pattern.
|
|
Separation: 2.0 mm (all)
|
|
Separation 1: 1mm, Separation 2: 4mm
|
|
|
|
|
|
Separation: 0.5 mm (all)
|
|
Separation 1: 1mm, Separation 2: 5mm
|
|
|
|
|
|
It defines the sequence of bling bead types and its spacing.
Insert Rays On
|
Define where the rays must be placed.
Available options are:
oReferences: Places rays where the column nodes are located. oReferences+Interior: Places rays where the column nodes are located and also between consecutive node pairs. |
|
Rays on References
|
|
Rays on References + Interior
|
|
|
|
|
|
It defines where to insert rays.
Starting Side
|
Select the side where the first bead will b placed.
|
|
Side A, first bead is red
|
|
Side B, first bead is red (opposite side)
|
|
|
|
|
|
It allows to select the border side to insert the first bead of the ray.
Margin from Border
|
Set the distance from the object borderline to the bling fill style.
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 2.0 mm
|
|
|
|
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 3.0 mm
|
|
|
|
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 3.0 mm
|
|
|
|
|
|
Margin from Border: 0.0 mm
|
|
Margin from Border: 5.0 mm
|
|
|
|
|
|
It sets a minimum distance from the beads to the object border.
Random Edge
|
Randomize the ends of the beads rays (side and amplitude).
Available options are:
oSide A oSide B oBoth Sides |
|
Random Amplitude: 20%
|
Random Amplitude: 40%
|
Random Amplitude: 60%
|
|
|
|
|
|
It applies a random effect to the ends of the rays.
Beads Angle Mode
|
Bling beads can be rotated an angle (from its center). Certainly, it makes sense for non-round beads only.
Some object types (path types) allow to automatically rotate the bead according to the tangent angle of the path at the place of the bead. For this case the available options are:
oPerpendicular: Beads are rotated following a variable direction perpendicular to the path, plus the specified angle value. oTangent: Beads are rotated following a variable direction tangent to the path, plus the specified angle value. oFixed (default option): Beads are placed at a the fixed angle specified by the angle value. |
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
|
Angle Mode: Fixed
|
Angle Mode: Tangent
|
Angle Mode: Perpendicular
|
|
|
|
|
This property is an optional feature.
|
It allows to rotate bling beads.
|
Read also
•Object COLUMN